VTR23-36-4B Synchro Receiver with NSN 5990008225451 by General Dynamics Global Imaging

Part Number: VTR23-36-4B

Alternate P/N: VTR23364B

Manufacturer: General Dynamics Global Imaging

NSN: 5990-00-822-5451

NIIN: 008225451

Item Name : Synchro Receiver

CAGE Code: 10112

FSC: 5990 Synchros and Resolvers

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 00

At Orbit NSN, we offer an expansive inventory of Synchro Receiver components by General Dynamics Global Imaging, including part number VTR23-36-4B, and many others. On this page, you can complete and submit a quote request form for this part number and others with the NSN 5990008225451 to receive a customized solution within 15 minutes or less of submission. All we ask is that you include relevant information while filling out this form, such as your desired part quantity and budget parameters, so our dedicated staff can best respond with a quote that suits your needs and restrictions alike.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Quality is the cornerstone of our operations at Orbit NSN, and as such, we proudly operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, in addition to adhering to a strict NO CHINA SOURCING policy. To make your search simple, our catalogs feature items with CAGE Code 10112 and FSC 5990 Synchros and Resolvers so that you always know you are procuring the exact items you need. To learn more about components with the NSN 5990-00-822-5451, such as this part manufactured by General Dynamics Global Imaging, give us a call or email at any time, and a dedicated team member will be more than happy to assist you however they can through the procurement process. Get started today to see why our customers continue to rely on our top-notch products and services for all their operational needs.

NSN Information for Part Number VTR23-36-4B with NSN 5990-00-822-5451, 5990008225451

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-822-5451 Item PartTypeName: SYNCHRO,RECEIVER	5990	008225451	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	7			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MILS20708-94	2	9	5

Characteristics Data of NSN 5990-00-822-5451, 5990008225451

MRC	Criteria	Characteristic
AAVH	SHOULDER DIAMETER	1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
AAZW	SECOND SHOULDER DIAMETER	1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
AAZX	SECOND SHOULDER LENGTH	0.1680 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.6930 INCHES MINIMUM AND 0.7190 INCHES MAXIMUM SINGLE SHAFT
AHCG	MAXIMUM TEMP RISE	65.0 DEG CELSIUS
AJSL	BODY SIZE	23
AJSR	ROTOR INPUT VOLTAGE RATING IN VOLTS	115.0 NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJST	ROTOR INPUT CURRENT RATING	945.0 MILLIAMPERES NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	8.20 NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	75.00 OUTPUT
AJVN	RECEIVER ERROR ANGULAR RANGE IN MINUTES	-60.0 TO 60.0
AJWR	SHOULDER LENGTH	0.2500 INCHES NOMINAL
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	2A SINGLE SHAFT
CQWQ	SHAFT THREAD LENGTH	0.2660 INCHES NOMINAL SINGLE SHAFT
CQXQ	PLUS J ZRO REACTANCE IN OHMS	119.00 NOMINAL
CRKL	PLUS J ZRS REACTANCE IN OHMS	9.62 NOMINAL
CRSY	ALIGNMENT HOLE DEPTH	0.1250 INCHES NOMINAL
CRTL	CRITICALITY CODE JUSTIFICATION	FEAT
CSJY	TRANSFORMATION RATIO	0.783 ROTOR TO STATOR NOMINAL
CTDW	PLUS J ZSO-90 REACTANCE IN OHMS	6.16 NOMINAL
CWBH	SHAFT NOMINAL THREAD SIZE	0.250 INCHES SINGLE SHAFT
TEST	TEST DATA DOCUMENT	81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	6 SCREW
AAQL	BODY STYLE	STANDARD ROUND D
AAVL	PILOT DIAMETER	0.5990 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM
ABHP	OVERALL LENGTH	4.2940 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ABPM	BODY DIAMETER	1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.2500 INCHES NOMINAL SINGLE SHAFT
AJSV	ROTOR INPUT ELECTRICAL POWER RATING	7.8 WATTS NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	9.10 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	12.00 NOMINAL
AJTE	ZSO-90 RESISTANCE IN OHMS	6.16 NOMINAL
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	100.00
AJVM	SPLINE TOOTH QUANTITY	22 SINGLE SHAFT
AJVV	TORQUE GRADIENT PER ANGULAR DEG	0.130 INCH-OUNCES NOMINAL
AJVW	ALIGNMENT HOLE QUANTITY	3
AJWQ	PILOT LENGTH	0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM
AJWV	AFT OF FIRST FLANGE DIAMETER	1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	3.4450 INCHES MAXIMUM
AJXA	SPLINE TOOTH DIAMETRAL PITCH	96 SINGLE SHAFT
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CRGZ	PLUS J ZSO REACTANCE IN OHMS	61.50 NOMINAL
CRSJ	SHAFT TYPE	SPLINE W/THREADS SINGLE SHAFT
CTCW	ALIGNMENT HOLE BOLT CIRCLE DIAMETER	1.6420 INCHES NOMINAL
FEAT	SPECIAL FEATURES	DEGAUSSING EQUIPMENT
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-S-20708/94 GOVERNMENT SPECIFICATION
ZZZT	NONDEFINITIVE SPEC/STD DATA	23TRA4A TYPE